From Windows Vista, boot manager is changed and new file system is added, so PartitionMagic does not support Windows Vista and subsequent versions. It supports Windows XP, but is not full compatible with XP SP2/SP3. Z420_3: E5-1650 v2 4.3GHz) / z420 Liquid Cooling/ 64GB HP DDR3-1866 ECC Reg / GTX 1060 6GB / HP Z Turbo M.PartitionMagic 8.0.5 is the last version released under Symantec on May 5, 2004. Z620_2: E5-1650 v2 4.4GHz) / z420 Liquid Cooling / 64GB HP DDR3-1866 ECC Reg / GTX 1070 Ti 8GB / Samsung SM951 M.2 512GB AHCI + Samsung 970EVO M.2 500GB NVMe + HP /HGST Enterprise 6TB > HP OEM Windows 7 Prof'l The Samsung SM951 M.2 512GB AHCI Passmark Disk Mark of 15506 is the best result over several years. The cloned M.2 boot drives drives booted quickly and had strong test results (see below). I recently took the z620_2 C: drive, and using (an old 11.9 version of) Partition Master (current is 15.5 or 15.8), changed a 1TB Seagate Constellation ES.3 mech'l HD (2016) from MBR to GPT and active, cloned the ZTurbo M.2 it to the ES.3 mech'l drive, defragged- after two years it was 17% fragmented, cleaned the files and registry with CCleaner, then cloned it to a HP ZTurbo M.2 Drive for a z420 (replacing a Samsung 860 EVO 500GB SSD) and again to a Samsung SM951 M.2 AHCI 512GB (on Lycom DT-120 M.2 to PCIe adapter) for z620_2, and am underway revising two 4TB and one 6TB drives partitions on backup drives. Also, it doesn't seem feasible to create a RAID 1 on dissimilar drives of different format.Ĭonsider a program such as EaseUS Partition Master as it is immensely useful to clone, drives, format, set up partitions and etc. Consider checking the current running temperatures of the drives and look for areas of contact with the heatsink.Īs for cloning to the new drive, the idea of configuring a RAID and then dismounting, sounds very time consuming- potentially many hours during which the system can not be used. A Samsung SM951 512GB AHCI M.2 on a Lycom DT-120 M.2 to PCIe adatpter includes a finned Copper heatsink sort of strapped to it with thermal pads between the surfaces. If the pads are about 1-1.5mm thick and a bit sticky on one side then it may be supposed that they are thermal pads to fill the space between the drives and the heatsink. Business PCs, Workstations and Point of Sale Systems.Printer Wireless, Networking & Internet.DesignJet, Large Format Printers & Digital Press.Printing Errors or Lights & Stuck Print Jobs.
Notebook Hardware and Upgrade Questions.
0 kommentar(er)
